HELP ! UnlockTool does not recognize the COM port of my xiaomi redmi note 11 pro. I need help.

[Antonio]

UnlockTool does not recognize the COM port of my xiaomi redmi note 11 pro. I need help. What drives do I need?

 

[Sangpuiipa]

Mediatek

 

[Antonio]

I can't flash the phone. The program waits for COM ports and does not finish flashing.

 

[Antonio]

 

[Sangpuiipa]

Turn off phone.
Press volume + or - and insert USB cable

 

[El_kabir]

check drivers are correctly installed and press and hold + and - button , untill program boots for programming

 

[Antonio]

Thank you very much for your help.
I used the following drivers:
1 - ADB-Setup-1.4.3.exe;
2 - ADB Bootloader Interface Driver;
3 - Mediatek Driver Auto Installer v1.1352;
4 - Minimal_adb_fastboot_v1.4_setup.exe;
And I restarted the phone in fastboot mode, but I can't make UnlockTool find the COM port of the Redmi Note 11 Pro phone, Chinese version.

 

[Antonio]

Look at the screen.

 

[Antonio]

 

[Antonio]

COM Port 3 - Access Denied.

 

[Antonio]

 

[El_kabir]

your problem is drivers one. Install drivers from "config" tab and try again

 

[Antonio]

Thank you!
I almost managed to flash it.
But I came across this message where it says the requested resource is in use. (Device "COM3" Open Error !!! Requested refusal in use - FAIL)

 

[Antonio]

 

[Antonio]

I repeated the process several times, but I didn't get the success I so desperately want.

 

[El_kabir]

reboot your computer and try again by pressing and holding + and - button and plug cable until program starts flashing

 

[Antonio]

I disabled the antivirus and managed to flash it.
But the cell phone stayed on the home screen (MI) and does not turn off or restart. I think I broke the phone.

 

[Antonio]

Hello my friend. I managed to install the Global ROM on my mobile. I used the Mi Flash Program. With UnlockTool it was not possible.