Successfully Redmi 2 Prime Flashing Done......

[chandan123]

EDL FLASH Searching for HS-USB QDLoader 9008... COM10
Connection : USB 2.0 High-Speed
USB Driver : [Qualcomm Incorporated] qcusbser - Version : 2.1.2.7
Connecting to device... OK
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:4096] [Host:16384]

Processing LUN0 - rawprogram0.xml
Writing NON-HLOS.bin [fat:49.39 MiB]->modem... OK 12.055s
Writing sbl1.mbn [elf:244.47 KiB]->sbl1... OK 0.139s
Writing sbl1.mbn [elf:244.47 KiB]->sbl1bak... OK 0.136s
Writing emmc_appsboot.mbn [elf:695.1 KiB]->aboot... OK 0.276s
Writing emmc_appsboot.mbn [elf:695.1 KiB]->abootbak... OK 0.251s
Writing rpm.mbn [elf:147.59 KiB]->rpm... OK 0.117s
Writing rpm.mbn [elf:147.59 KiB]->rpmbak... OK 0.121s
Writing tz.mbn [elf:476.31 KiB]->tz... OK 0.246s
Writing tz.mbn [elf:476.31 KiB]->tzbak... OK 0.260s
Writing hyp.mbn [elf:56 KiB]->hyp... OK 0.095s
Writing hyp.mbn [elf:56 KiB]->hypbak... OK 0.094s
Writing splash.img [raw:5.27 MiB]->splash... OK 1.345s
Writing sec.dat [raw:80 bytes]->sec... OK 0.122s
Writing boot.img [kernel:8.56 MiB]->boot... OK 2.185s
Writing system.img [sparse:980.22 MiB]->system... OK 206.372s
Writing cache.img [sparse:6.81 MiB]->cache... OK 0.970s
Writing persist.img [sparse:4.61 MiB]->persist... OK 1.157s
Writing recovery.img [kernel:10.21 MiB]->recovery... OK 2.535s
Writing userdata.img [sparse:520.26 MiB]->userdata... OK 126.438s
Writing gpt_main0.bin [raw:17 KiB]->PrimaryGPT... OK 0.118s
Writing gpt_backup0.bin [raw:16.5 KiB]->BackupGPT... OK 0.118s
Applying patch0.xml... OK
Rebooting... OK
Total transfer : 1.55 GiB
Transfer Speed : 4.47 MiB/s
UNLOCKTOOL 2022.01.19.0
Elapsed time : 6 minutes 8 seconds

 

[azerotech23]

How?

 

[greatselvas]

How?

GUIDE VIDEO - How to flash not listed QC models on UT | FORUM.UNLOCKTOOL.NET