HELP ! Device is not in Sahara mode

[flipped156]

EDL FLASH Selected Model : Xiaomi Redmi Note 8


Code Name : Ginkgo


Operation : Auth Flash


Authenticating... OK


Retrieving data... OK [251,45 KiB]


Initializing data... OK


Searching for HS-USB QDLoader 9008... COM3


Connection : USB 2.0 High-Speed


USB Driver : [Quectel Incorporated] qcusbser - Version : 5.0.1.5


Connecting to device... OK


Handshaking... FAIL


[Sahara] Reading Hello - Failed to handshake with device PBL!


Trying to connect to FIREHOSE Mode!


Connecting to flash programmer... FAIL





UNLOCKTOOL v2021.03.09.3


Elapsed time : 44 seconds

 

[trihcpsci]

USB Driver : [Quectel Incorporated] qcusbser - Version : 5.0.1.5

This driver may cause of problem. Please try to use different drivers provider

 

[flipped156]

USB Driver : [Quectel Incorporated] qcusbser - Version : 5.0.1.5

This driver may cause of problem. Please try to use different drivers provider

I already tried with version 2.13.5 and 2.12

 

[flipped156]

Selected Model : Xiaomi Redmi Note 8
Code Name : Ginkgo
Operation : Auth Flash
Authenticating... OK
Retrieving data... OK [251,45 KiB]
Initializing data... OK
Searching for HS-USB QDLoader 9008... COM10
Connection : USB 2.0 High-Speed
USB Driver : [Lenovo Inc.] leusbser - Version : 2.0.9.6
Connecting to device... OK
Handshaking... FAIL
[Sahara] Reading Hello - Failed to handshake with device PBL!
Trying to connect to FIREHOSE Mode!
Connecting to flash programmer...

 

[trihcpsci]

Can you try with another cable, this is the result when using a non compatible cable:

Aftering changing difference cable :

 

[flipped156]

Can you try with another cable, this is the result when using a non compatible cable:
View attachment 1603

Aftering changing difference cable :
View attachment 1604

Tried and

Selected Model : Xiaomi Redmi Note 8
Code Name : Ginkgo
Operation : Factory Reset [1]
Authenticating... OK
Retrieving data... OK [251,45 KiB]
Initializing data... OK
Searching for HS-USB QDLoader 9008... COM6
Connection : USB 2.0 High-Speed
USB Driver : [Qualcomm Incorporated] qcusbser - Version : 2.1.2.7
Connecting to device... OK
Handshaking... FAIL
[Sahara] Reading Hello - Failed to handshake with device PBL!
Trying to connect to FIREHOSE Mode!
Connecting to flash programmer... FAIL

UNLOCKTOOL v2021.03.09.3
Elapsed time : 36 seconds

 

[flipped156]

Already rebooted and do edl mode again and

 

[flipped156]

Already rebooted and do edl mode again and

After do reboot again works

 

[flipped156]

[EDL] FACTORY RESET Selected Model : Xiaomi Redmi Note 8
Code Name : Ginkgo
Operation : Factory Reset [1]
Authenticating... OK
Retrieving data... OK [251,45 KiB]
Initializing data... OK
Searching for HS-USB QDLoader 9008... COM6
Connection : USB 2.0 High-Speed
USB Driver : [Quectel Incorporated] qcusbser - Version : 5.0.1.5
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
SOC : [3130664753] [Snapdragon 665] [SDM665] [0x0010A0E1]
PK_HASH[0] :1BEBE3863A6781DB4B01086063007334
PK_HASH[1] E9E5CA14971C7C4F4358EC9D79CDA46
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:0] [Host:16384]
Reading partition map... OK
LU Count : 1
Reading info... OK
Android Version : 10
Security Patch : 2021-01-01
Formatting data... OK
Erasing FRP... OK
Total sector : 1024

Rebooting... OK

UNLOCKTOOL v2021.03.09.3
Elapsed time : 22 seconds

 

[TUnlockTool]

Please when have error COMPORT Then Reconnect testpoint EDL

 

[Zamin19]

Please when have error COMPORT Then Reconnect testpoint EDL

Help me, I don’t know what to do anymore, I changed the usb wire to a new one, changed the usb ports too, set the driver to different ones, nothing works, for 2 days this problem has been on this particular model.
I no longer know what to do how to reset my account.

 

[andresanzola]

Luego de hacer el disable Micloud no lo quita sigue igual

 

[realpablito]

tenho o mesmo problema alguem conseguiu resolver ?

 

[TUnlockTool]

tenho o mesmo problema alguem conseguiu resolver ?

reconnect edl and cable usb