HELP ! OPPO CPH2035 after FACTORY RESET [4] tell ask password in recovery

[akk.vpm]

hi 2 all
Oppo Reno3 Pro CPH2035 after FACTORY RESET [4] tell ask password in recovery
unlocktool team help me
log

FACTORY RESET [4] [ANDROID11] Phone must have battery inside!
Waiting for device... COM18
Connection : USB 2.0 High-Speed
USB Driver : [MediaTek Inc.] wdm_usb
Boot Mode : PRELOADER [22D9:0006]
Authenticating... OK
Initializing META... OK
Connecting to META... OK
Reading Hardware Info...
BaseBand : MT6779
DSP firmware : Fri Jan 29 01:29:48 CST 2021
H/W board : CPH2035export_11_C.15_202101290043
Reading Software Info...
Brand : OPPO
Board : oppo6779
Model : CPH2035
Android : 11
Formatting data... OK
Shutting down device... OK
Hold VOL- and POWER to enter RECOVERY then WIPE DATA!
UNLOCKTOOL v2021.02.16.1
Elapsed time : 5 seconds

thx

 

[TUnlockTool]

hi 2 all
Oppo Reno3 Pro CPH2035 after FACTORY RESET [4] tell ask password in recovery
unlocktool team help me
log

FACTORY RESET [4] [ANDROID11] Phone must have battery inside!
Waiting for device... COM18
Connection : USB 2.0 High-Speed
USB Driver : [MediaTek Inc.] wdm_usb
Boot Mode : PRELOADER [22D9:0006]
Authenticating... OK
Initializing META... OK
Connecting to META... OK
Reading Hardware Info...
BaseBand : MT6779
DSP firmware : Fri Jan 29 01:29:48 CST 2021
H/W board : CPH2035export_11_C.15_202101290043
Reading Software Info...
Brand : OPPO
Board : oppo6779
Model : CPH2035
Android : 11
Formatting data... OK
Shutting down device... OK
Hold VOL- and POWER to enter RECOVERY then WIPE DATA!
UNLOCKTOOL v2021.02.16.1
Elapsed time : 5 seconds

thx

you can wait now , i make loader factory reset New Method

 

[TUnlockTool]

Now you can exit tool and open again try Auth bypass

 

[akk.vpm]

Hi UnlockTool team
Oppo Reno3 Pro CPH2035 Auth bypass & factory reset ok
thx
log
[BROM] FACTORY RESET Selected Model : Oppo Reno 3 Pro [Auth Bypass] [Brom Factory]
Code Name : CPH2035 | 2036 Auth Bypass
Operation : Factory Reset [3]
Authenticating... OK
Retrieving data... OK [749.66 KiB]
Initializing data... OK
1. Power Phone OFF
2.Press And Hold "Vol+" And "Vol-" And Insert USB Cable !
Waiting for device... COM69
Connection : USB 1.0 High-Speed
USB Driver : [MediaTek Inc.] wdm_usb
Boot Mode : BOOTROM [0E8D:0003]
Connected to BROM!
Sending DA... OK [211.01 KiB]
Syncing with DA...
HW Chip : MT6779 [6779] - HW Ver : 0xCA01 - SW Ver : 0x0000
Bootloader Ver : 0x00 - Secure Ver : 0x00
Internal RAM Size : 512 KiB
External RAM Size : 8 GiB
Storage : UFS
Vendor ID : Samsung [0x1CE]
CID : KM8V7001JM-B810
FWVer : 0900
UFS LU0 Size : 4 MiB [0x400000]
UFS LU1 Size : 4 MiB [0x400000]
UFS LU2 Size : 119.17 GiB [0x400000]
Writing userdata... OK [50.99 MiB] 37.721s
Rebooting device... OK

UNLOCKTOOL v2021.02.16.1
Elapsed time : 16 minutes 46 seconds