In huawei,
you type 980 in the search bar.
You select the second choice (this one worked for me with honor view 20 kirin 980)
You connect in test point and reset frp.
yes i already do that firmware security too high cannot remove it id still there on the phone i have firmware id but how to flash it wih unlock tool what mode operation to put can flash it i put phone upgrade mode nothing happen . for support
firmware huawei remove id its this
https://drive.google.com/file/d/1S3El74EU0rjEf_-to1WD1wSpEXYPykle/view
[USB 1.0] ERASE FRP Selected Model : HiSilicon Kirin 980
Code Name : Hi980_Unlocked
Operation : Kirin Testpoint [2]
Authenticating... OK
Retrieving data... OK [4.56 MiB]
Scanning port... COM20
Connecting to port... OK
Connection : USB 1.0 Full-Speed
USB Driver : [HUAWEI Incorporated] HSPL_usbvcom - Version : 2.0.7.1
Initializing... OK
Writing patch1... OK 2.088s
Writing patch2... OK 0.345s
Writing patch3... OK 1.267s
Reading partition map... OK [71]
Searching for bootloader key... OK [3:10485760:5242880]
Patching bootloader... OK
Please disconnect device and enter testpoint again!
Scanning port... COM20
Connecting to port... OK
Connection : USB 1.0 Full-Speed
USB Driver : [HUAWEI Incorporated] HSPL_usbvcom - Version : 2.0.7.1
Writing sec_usb_xloader... OK 1.541s
Writing sec_usb_xloader2... OK 0.424s
Writing unlock1... OK 0.622s
Writing unlock2... OK 0.158s
Writing sec_fastboot... OK 37.384s
Waiting for fastboot... OK
Product Model : HMA-AL00
Erasing FRP... OK
UNLOCKTOOL 2021.08.25.0
Elapsed time : 1 minute 56 seconds
Huawei still on the phone after make this operation unlock bootloader i think unlock tool not support.